How To Access The Network Attached Storage (N A S)

HOW TO ACCESS THE NETWORK ATTACHED STORAGE (NAS)

Step 1: Go To Start

Step 2: Go To Command Prompt (RUN)

Step 3: Type --> \\nasstore\"username"

Step 4: Click --> Ok

HOW TO CHANGE PASSWORD

Step 1: Go To Start

Step 2: Go To Command Prompt (RUN)

Step 3: Type --> telnet 172.16.1.75

Step 4: Click --> Ok

Step 5: Give your login name. After login the screen may be looked as

Step 6: Type --> smbpasswd

Step 7: Type --> old smbpasswd as "old password" (initially its your username)

Step 8: Type --> new smbpasswd as "**********"

Step 9: Type --> retype new smbpasswd as "**********"

Step 10: After changed the password the screen may be looked as

Important Note: How to disconnect NAS user drive.

Step 11: You have to manually disconnect the NAS drive by right click the My

Network Places icon in the desktop then click disconnect network

drive. The following screen may look as...

Step 12: Select the corresponding NAS user drive from the window. it is

shown below as...

Step 13: Click OK.

For further technical support contact: S.FAIZUR RAHMAN (NAS Administrator)